Autochrome Lumière

A box of Autochrome plates, expiration date 1923

The colored starch grains in an Autochrome plate, greatly enlarged

An Autochrome of the Taj Mahal reproduced in The National Geographic Magazine, March 1921

An Autochrome of a World War I Nieuport biplane fighter, circa 1917

Mirror view in a diascope of a 1913 Autochrome of Percy MacKaye, photographed by Arnold Genthe

The Autochrome Lumière is an early color photography process. Patented in 1903 by the Lumière brothers in France and first marketed in 1907, it was the principal color photography process in use before the advent of subtractive color film in the mid-1930s.

Structure and use

Autochrome is an additive color "mosaic screen plate" process. The medium consists of a glass plate coated on one side with a random mosaic of microscopic grains of potato starch dyed red-orange, green, and blue-violet (an unusual but functional variant of the standard red, green, and blue additive colors) which act as color filters. Lampblack fills the spaces between grains, and a black-and-white panchromatic silver halide emulsion is coated on top of the filter layer.

Unlike ordinary black-and-white plates, the Autochrome was loaded into the camera with the bare glass side facing the lens, so that the light passed through the mosaic filter layer before reaching the emulsion. The use of an additional special orange-yellow filter in the camera was required to block ultraviolet light and restrain the effects of violet and blue light, parts of the spectrum to which the emulsion was overly sensitive. Because of the light loss due to all the filtering, Autochrome plates required much longer exposures than black-and-white plates and films, which meant that a tripod or other stand had to be used and that it was not practical to photograph moving subjects. The plate was reversal-processed into a positive transparency — that is, the plate was first developed into a negative image but not "fixed", then the silver forming the negative image was chemically removed, then the remaining silver halide was exposed to light and developed, producing a positive image.

The luminance filter (silver halide layer) and the mosaic chrominance filter (the colored potato starch grain layer) remained precisely aligned and were distributed together, so that light was filtered in situ. Each starch grain remained in alignment with the corresponding microscopic area of silver halide emulsion coated over it. When the finished image was viewed by transmitted light, each bit of the silver image acted as a micro-filter, allowing more or less light to pass through the corresponding colored starch grain, recreating the original proportions of the three colors. At normal viewing distances, the light coming through the individual grains blended together in the eye, reconstructing the color of the light photographed through the filter grains.

Manufacturing techniques

To create the Autochrome color filter mosaic, a thin glass plate was first coated with a transparent adhesive layer. The dyed starch grains were graded to between 5 and 10 micrometers in size and the three colors were thoroughly intermingled in proportions which made the mixture appear gray to the unaided eye. They were then spread onto the adhesive, creating a layer with approximately 4,000,000 grains per square inch but only one grain thick. The exact means by which significant gaps and overlapping grains were avoided still remains unclear. It was found that the application of extreme pressure would produce a mosaic that more efficiently transmitted light to the emulsion, because the grains would be flattened slightly, making them more transparent, and pressed into more intimate contact with each other, reducing wasted space between them. As it was impractical to apply such pressure to the entire plate all at once, a steamroller approach was used which flattened only one very small area at a time. Lampblack was used to block up the slight spaces that remained. The plate was then coated with shellac to protect the moisture-vulnerable grains and dyes from the water-based gelatin emulsion, which was coated onto the plate after the shellac had dried. The resulting finished plate was cut up into smaller plates of the desired size, which were packaged in boxes of four. Each plate was accompanied by a thin piece of cardboard colored black on the side facing the emulsion. This was to be retained when loading and exposing the plate and served both to protect the delicate emulsion and to inhibit halation.

The 1906 U.S. patent describes the process more generally: the grains can be orange, violet, and green, or red, yellow, and blue (or "any number of colors"), optionally with black powder filling the gaps.

Viewing techniques

Because the presence of the mosaic color screen made the finished Autochrome image very dark overall, bright light and special viewing arrangements were needed for satisfactory results.

Stereoscopic Autochromes were especially popular, the combined color and depth proving to be a bewitching experience to early 20th Century eyes. Usually of a small size, they were most commonly viewed in a small hand-held box-type stereoscope. Larger, non-stereoscopic plates were most commonly displayed in a diascope, which was a folding case with the Autochrome image and a ground glass diffuser fitted into an opening on one side, and a mirror framed into the other side. The user would place the diascope near a window or other light source so that light passed through the diffuser and the Autochrome, and the resulting back-lit, dark-surrounded image would be viewed in the mirror. Slide projectors, then known as magic lanterns and stereopticons, were a less common but especially effective display technique, more suitable for public exhibitions. Unfortunately, projection required an extremely bright and therefore hot light source (a carbon arc or a 500 watt bulb were typical) and could visibly "fry" the plate if continued for more than two or three minutes, causing serious damage to the color. More than a few surviving Autochromes suffer from such "tanning" and conventional projection is not a recommended means of displaying these irreplaceable images today.

However, a projector-like optical system (i.e., using condenser lenses for illumination, with a viewing lens in place of the projection lens), employing daylight (not direct sunlight) for the light source, can produce comparably excellent visual results—although for only one viewer at a time—without the unacceptable hazards of actual projection.

The use of a "light box" or similar highly diffused artificial light source for viewing Autochromes, although now nearly universal, is unfortunate, as the heavy scattering of light within and among the several layers of coatings on the plate degrades the color saturation. The slight pinkish tinge caused by colloidal scattering (the effect seen through a glass of water into which a couple of drops of milk have been mixed) is exacerbated, and the use of artificial light—especially fluorescent light—upsets the color rendition of a system which the Lumière Brothers carefully balanced for use with natural daylight.

Making modern film or digital copies of Autochromes introduces other problems, because a color system based on red, green, and blue is being used to copy an image which exists in a red-orange, green, and blue-violet system, providing further opportunities for color degradation. Vintage reproductions of Autochromes in old books and magazines have often been noticeably hand-adjusted by the photoengravers in an effort to compensate for some of the difficulties of reproduction, and as a result they sometimes look more like hand-colored photographs than "natural color" ones. In short, it is very difficult to form an accurate impression of the appearance of any Autochrome image without seeing the original "in person" and correctly illuminated.

Artistic considerations

Autochrome nude study by Arnold Genthe

If an Autochrome was well made and has been well preserved, color values can be very good. The dyed starch grains are somewhat coarse, giving a hazy, pointillist effect, with faint stray colors often visible, especially in open light areas such as skies. The smaller the image, the more noticeable these effects are. The resulting "dream-like" impressionist quality may have been one reason behind the enduring popularity of the medium even after more starkly realistic color processes had become available.

Although difficult to manufacture and relatively expensive, Autochromes were relatively easy to use and were immensely popular among enthusiastic amateur photographers—at least, among those who could bear the cost and were willing to sacrifice the convenience of hand-held "snapshooting" in black-and-white. However, Autochromes failed to sustain the initial interest of more serious "artistic" practitioners, largely due to their inflexibility. Not only did the need for diascopes and projectors make them extremely difficult to publicly exhibit, they allowed little in the way of the manipulation much loved by aficionados of the then-popular Pictorialist approach.

Advent of film-based versions

Autochromes continued to be produced as glass plates into the 1930s, when film-based versions were introduced, first Lumière Filmcolor sheet film in 1931, then Lumicolor roll film in 1933. Although these soon completely replaced glass plate Autochromes, their triumph was short-lived, as Kodak and Agfa soon began to produce multi-layer subtractive color films (Kodachrome and Agfacolor Neu respectively) of the general type still in use today. Nevertheless, the Lumière products had a devoted following, above all in France, and their use persisted long after modern color films had become available. The final version, Alticolor, was introduced in 1952 and discontinued in 1955, marking the end of the nearly fifty-year-long public life of the Autochrome.

Important Autochrome collections

Between 1909 and 1931, a collection of 72,000 Autochrome photographs, documenting life at the time in 50 countries around the world, was created by French banker Albert Kahn. The collection, one of the biggest of its kind in the world, is housed in The Albert Kahn Museum on the outskirts of Paris. A new compilation of images from the Albert Kahn collection was published in 2008.

The National Geographic Society made extensive use of Autochromes and other mosaic color screen plates for over twenty years. Many thousands of original Autochrome plates are still preserved in the Society's archives.

In the U.S. Library of Congress's huge collection of American Pictorialist photographer Arnold Genthe's work, 384 of his Autochrome plates were among the holdings as of 1955.

Neo-Autochromists

In recent years, there has been a revival of interest in the process by some groups. Groups in France, working with the original Lumiere machinery and notes, and a few individuals in the United States, are attempting to recreate the process. Very few complete successes have resulted. Recently, the process was recreated by the photographer Frédéric Mocellin.

In popular culture

• The 2006 film The Illusionist tried to recreate the look of Autochrome, although apparently basing that "look" on published reproductions rather than on actual Autochrome plates.

• Modern image sensors in digital cameras most commonly use a Bayer filter, which works in essentially the same way as the colored starch grains in an Autochrome plate—by breaking up the image into microscopically small color-filtered elements. In physical arrangement, however, the Bayer filter mosaic much more closely resembles the regular geometric pattern used in other color screen plates of the Autochrome era, such as the Paget and Finlay plates.

• Vladimír Jindřich Bufka was a pioneer and popularizer of Autochrome in Bohemia.

See also

• Dufaycolor

External links

• The Albert Kahn website
• 1907-1935: Universal Polychrome Overview
• Autochrome: Beauty in Colored Pointillism
• Dawn of Colour (includes original instruction booklet (1908)) National Media Museum
• Photographs of World War I in color
• The Albert-Kahn Museum Official Web site (French)
• Autochromes (including World War I) et al. by Jean-Baptiste Tournassoud (some errors in Autochrome historical information)
• Autochromes from Belgium
• Presentation of Czech Autochrome
• Autochromes from the Mark Jacobs Collection